PP200/01x - Concurrent Technologies PP200/01x CPU Board - Intel Pentium 4 Processor-M...
Request Quote
For Price
- Part Number:
- PP200/01x
- Model Number:
- PP200/01x
- Make:
- CONCURRENT TECHNOLOGIES
- Lead Time:
- Available
- Qty In Stock:
- Available
Concurrent Technologies PP200/01x CPU Board - Intel Pentium 4 Processor-M Single Board Computer PICMG 2.16 Compliant Simple Type: CPU Board
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 1 x PMC module interface (32/64-bit and 33/66 MHz)
- 2 x asynchronous RS232 serial channels
- 2 x USB ports
- 2.2 GHz or 1.7 GHz Intel Pentium 4 Processor-M:
- 3 x 10/100/1000Mbps Ethernet interfaces
- 400 MHz Front Side Bus
- 512 Kbytes of BIOS Flash EPROM
- 8 Mbytes of Application Flash
- CompactFlash site
- CompactFlash/MicrodriveT carrier (within a single slot)
- CompactPCI controller:
- Dual Gigabit Packet Switching Backplane (PICMG 2.16)
- Floppy disk interface
- High performance EIDE interfaces with on-board
- High resolution graphics interface
- no CPU fan needed
- Optional blank front panel (see PP 200/11x datasheet)
- Optional on-board 2.5 inch disk drive or
- Optional Transition Module for rear panel I/O
- Parallel Printer Port (ECP, EPP and IEEE1284)
- PS/2 Keyboard and Mouse port
- single slot
- Support for Linux, Windows NT, Windows 2000, Windows XP, Windows XP Embedded, VxWorks and QNX
- Ultra 160 SCSI interface
- Up to 2 Gbytes DDR SDRAM (with ECC)
- Watchdog timer; Long Duration Timer
Specifications
- Compliance: compliant with PICMG 2.0 R3.0; 3.3V or 5V signaling levels: universal signaling supported 33/66 MHz; 32/64-bit interface accessed via J1/J2 connectors utilizing a PCI-PCI bridge for off-board accesses PICMG 2.1 R2.0 Hot Swap Specification compatible as hot swap controller only operates as a System Slot controller or in a peripheral slot option to disable CompactPCI interface (Satellite Mode): receives power from CompactPCI bus board can be hot swapped in this mode J4 connector not fitted
- CPU: 2.2 GHz or 1.7 GHz Intel Pentium 4 processor M: using a socketed Flip-Chip CPU 400 MHz Front Side Bus (FSB) 512 Kbytes of secondary (L2) on-die cache no CPU fan utilizes 64-bit ServerWorks ServerSet GC-LE chipset
- Dimensions: supporting up to 2 Gbytes of 200MHz DDR ECC SDRAM: up to 2 Gbytes provided via a 184-pin DIMM socket single bit error protection; double-bit error detection accessible from Intel Pentium 4 processor-M or CompactPCI bus
- Environment: 0C to +55C (operating) 10% to 90% Relative Humidity (operating non-condensing) -40C to +70C (storage) 10% to 90% Relative Humidity (storage non-condensing)
- Ethernet: 3x channels supporting 10 Base-T, 100 Base-TX, 1000 Base-T implemented by an Intel 82540EM controller (32-bit PCI bus) and Intel 82546EB LAN controller (64-bit PCI bus) one channel accessible via front panel RJ45 two channels accessible via J3 to the PSB or the Transition Module support for PICMG 2.16- Packet Switching Backplane (PSB)
- Expansion Interface: +5V@7A (typical at 2.2 GHz with 1 Gbyte DRAM); +5%/-3% +3.3V@8A; +5%/-3% +12V@0.0A; -12V@0.0A +12V and -12V routed to PMC expansion slot
- FDD: Phoenix ServerBIOS comprehensive Power-On Self-Test (POST) LAN boot firmware included
- Form Factor: 512 Kbytes of BIOS Flash EPROM 8-bits wide 8 Mbytes Application Flash
- Gross Weight: implemented by a Silicon Motion SM722 providing: 8 Mbytes video memory resolutions up to 1280x1024 supporting up to 16M colors accessed via a 26-way high-density connector on front panel flat panel supported via DVI-D interface via J3 to the Transition Module
- IDE Interface: EIDE interface: supports up to Ultra-DMA 100 for high performance drives two channels (primary and secondary) secondary channel supports on-board CompactFlash site plus, secondary channel options: on-board 2.5 inch disk drive; or, support for 1 or 2 CompactFlash or IBM Microdrive type 2 drives. Either option within a single slot primary channel is accessible via J5 to the Transition Module Ultra 160 SCSI: implemented by an LSI Logic 53C1000 accessible via J3 to the Transition Module
- Input: PICMG 2.9 R1.0 (System Management Specification) implements the IPMB0 interface on-board Baseboard Management Controller 8 Kbytes of non-volatile memory
- Memory: 6U form factor: 9.2inches x 6.3inches (233mm x 160mm) single-slot: 0.8inches (20.3mm); connectors: IEC-1076-4-101 for J1-J5 shock: 20g, 11ms, 1/2 sine (operating) 30g, 11ms, 1/2 sine (non-operating) vibration: 5Hz-2000Hz at 2g , 0.38mm peak displacement (operating) 5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating)
- OS: keyboard and mouse interfaces accessed via a 26-way high-density connector on front panel or via J5 to the Transition Module floppy disk interface via J5 to the Transition Module 2x USB (Universal Serial Bus) interfaces; one via front panel, both via J5 to the Transition Module parallel printer port interface (ECP, EPP, and IEEE1284) via J5 to the Transition Module 1x32-bit Long Duration Timer with processor interrupt capability system fan monitor; CPU temperature monitoe; voltages monitor: all accessible via IPMI watchdog timer; speaker interface
- Power Connector: 1x PMC slot with I/O via front panel: supports 32/64-bit, 33/66 MHz PCI operation dedicated PCI bus for optional throughput
- Processor: Intel Pentium 4
- SATA: PCB (PWB) manufactured with flammability rating of 94V-0
- Serial: 2x RS232 serial channels using 16550 compatible UART's 1x channel via a 26-way high-density connector on front panel and both channels via J5 to 2x D-type connectors on the Transition Module each channel supports CTS, RTS, DSR, DTR, DCD, and RI via front panel and Transition Module
- Socket: Linux, Windows NT, Windows 2000, Windows XP, Windows XP Embedded, VxWorks and QNX
Applications
- None Available
Aliases
- None Available